Meson Silicones

Defoaming and antifoaming test by circulating bubbling: Formulation: semi-synthetic water-based cutting fluid

Compared with two mainstream competitors in the market, Meson M9313 & M993 have obvious faster defoaming speed.

Meson defoamer and two competitors, with the same amount of solid content were added into real pulping black liquor and tested by cyclic bubbling method.After stored for 25 days, compared to the ot...

Meson black liquor antifoam M0316 defoaming comparison

Meson PSA605 has no residue in the oven at 240 ℃ for 30 minutes.Meson PSA8499 has no residual adhesive in the oven at 260 ℃ for 30 minutes, while PSA604 has less residual adhesive relatively.

The average peeking of PSA609 on PET with 20μm dry adhesive can achieve above 1400 g/in.

Electron microscopy image of Meson light diffusion powder SP701-1

According to the cyclic bubbling test data of Meson M3371S defoamer for metalworking fluid, its persistent foam suppression performance is slightly better than of the competitor in systems A & B.

Test data shows that Meson SP series are featured with a higher transmittance under the same haze, indicating less light loss and brighter finished products.

Meson silicone spray is featured with good heat resistance. It has been successfully applied in nylon and polyester at the temperatures between 260 ° C and 352 ° C.

Meson have different synthesis routes for silicone resin technology, which can control the molecular weight and functional groups of silicone resin as required.

Comparison of defoaming speed and durable anti-foaming properties

PrefaceThere are specific requirements and standards for each industry and each application to choose antifoams. Some users particularly emphasis on appearance, while some reqire the performance of...

SIMULSION® M4279 antifoam emulsion is designed for textile chemicals which can work in processing pools with large changes in PH value. For dy...